Ethanol is a type of alcohol that can be used as a motor fuel or fuel additive. It is also present in alcoholic beverages, scents, and is sometimes used as a recreational drug. Previous studies revealed that ethanol can be produced from lignocellulosic biomass of corn stovers.
The process was originally considered as promising. The use of supposedly “useless” agricultural by-products, like corn stovers, to produce an alternative source of motor fuel was a sensational discovery, considering the scarcity of gasoline available for worldwide consumption.
Further studies revealed however, that the production of ethanol from corn stover has been found out to waste corn because of the following reasons:
1. Ethanol combustion produces 2.14 times as much ground level ozone than gasoline
The data was presented by the Clean Fuels Report about the comparison of fuel emissions between ethanol and gasoline.
The report further stated that ethanol contributes 1.7 to the pollution caused by smog, while gasoline contributes only 1.0.
2. Prices of corn increased
Because of the increase need in the production of ethanol from corn stovers, the price of corn has actually increased in the market.
The reduced supply of corn as staple food has prompted the increase in its price, while the total cost of producing ethanol from corn has also increased. Either way, the consumers do not benefit in the end.
3. Processing of corn stovers to ethanol is costly
Contrary to previous assumptions, the production of a liter of ethanol is more costly than 1 liter of gasoline.
This is because the process of hydrolysis needs large amounts of water, needs more money to deal with carbon emissions, and requires more energy for its processing. The sugars present in the corn stovers have also to undergo fermentation before they are converted to ethanol, adding more production costs.
4. Environmental friendliness of ethanol is in question
Ethanol from corn is not altogether environmental friendly because it produces acetaldehyde and formaldehyde which are considered as harmful substances. These substances can cause cancer when persons are exposed continuously for a long period of time. They pollute the environment through the water that you drink, the air you breathe and the substances or food that you take in.
The US national budget for the production of ethanol from corn was recently slashed last June, 2011 by the US Senate because of some of these aforementioned reasons.
The corn prices have dropped since then, and with this development, the corn industry would go back to being one of the primary sources of food for humans and animals and not as a source of biofuel.
About Clinical Chemistry, the determinations of blood constituents like glucose, uric acid, triglycerides, cholesterol, blood gas, enzymology, electrolytes, drugs and the clinical significance of their abnormal values. Deals also with quality assurance and function tests.
AdSense
Wednesday, March 18, 2015
Saturday, July 19, 2014
The Analysis of Blood Gas
Blood gas analysis (BGA) is also known as arterial blood gas determination (ABG), and is considered a special test in the clinical laboratory. The commonly assayed parameters are partial pressure carbon dioxide (pCO2), hydrogen ion concentration (pH) and bicarbonate (HCO3). The determination of these substances helps in the evaluation of the acid-base status of a patient.
![]() |
| Image credit: Lara Enriquez |
The following are certain precautions observed by medical technologists in the extraction of arterial blood for blood gas analysis.
1. The best specimen is arterial blood.
This is because arterial blood is more homogenous than venous blood. The blood could be collected in the following common arterial sites: the radial artery, the brachial artery, the femoral artery and the scalp artery.
The most ideal anticoagulant is dry heparin, and the preferable syringe is a glass syringe. Recently, new receptacles are manufactured which are specifically for BGA.
2. Collect the specimen anaerobically (without air).
Your specimen should be covered at all times to prevent the escape of carbon dioxide to the air. It should be transported immediately to the testing laboratory. If it is left uncovered, unreliable results will be obtained which will lead to a wrong diagnosis by the Clinician/physician.
3. Preserve in crushed ice, if not tested immediately.
The low temperature has to be maintained. An increase in temperature would cause the gas to evaporate. It must also be preserved properly to obtain reliable results, aside from making sure that it is covered.
The body naturally maintains a state of balance called homeostasis. In the case of blood pH, this is done by the lungs and the kidneys which act as compensatory organs for one another. When the lungs are dysfunctional just like in respiratory diseases (emphysema, TB, chronic bronchitis, etc), the kidneys respond by excreting or retaining bicarbonate (HCO3).
On the other hand, when the kidneys are dysfunctional, the lung will respond by the increase retention or excretion of carbon dioxide (CO2). Through these physiologic processes, the critical pH (acidity and alkalinity) of blood is maintained at 7.35 to 7.45. Any slight variation from this pH, whether an increase or decrease, will lead to coma and eventually death. It is therefore imperative that the body maintains this slightly alkaline pH of blood for good health.
The following are acid-base conditions and the corresponding compensatory mechanisms :
Values : pH - decreased , PCO2 normal, HCO3 - decreased
Condition - metabolic acidosis
Compensatory mechanism - hyperventilation , increase excretion of CO2
decreased retention of CO2
Values: pH increased, HCO3 - increased , PCO2-normal
Condition - metabolic alkalosis
Compensatory mechanism - hypoventilation, decreased excretion of CO2
adparams.getadspec('c_billboard1');
increased retention of CO2
Values : pH- increased , PCO2 - decreased , HCO3 -normal
Condition - respiratory alkalosis
Compensatory mechanism : increased retention of HCO3
decreased excretion of H+
Values: pH-decreased , PCO2 -increased, HCO3 -normal
Condition: respiratory acidosis
Compensatory mechanism : increased retention of HCO3,
increased excretion of H+
Clinical laboratory scientists or medical technologists solve for the pH of blood making use of the
Henderson-Hasselbalch Equation: (H & H equation). The formula for this is:
pH = 6.1 + log (HCO3)/DCO2
HCO = TCO2-DCO2
DCO2 = PCO2 X 0.031
Where: pH =indicates the acidity or alkalinity of a solution (hydrogen ion concentration.
HCO3 - bicarbonate
DCO2 - dissolved carbon dioxide
TCO2 - total carbon dioxide
Normal values are:
pH = 7.35-7.45
HCO3 = 22 - 26 mmol/L
PCO2 = 35 - 35 mmHg
TCO2 = 23-27 mmol/L
Arterial blood gas has very important clinical significances. It is crucial that the Medical Technologists know the precautions and perform the determination accurately. A well performed ABG signifies a patient well served.
This was published by http://voices.yahoo.com/the-analysis-blood-gas-2482704.html?cat=5.
Reference:
Calbreath, Donald F. Fundamentals of Clinical Chemistry
Wednesday, May 21, 2014
CLINICAL CHEMISTRY 3 FINAL EXAMS - TABLE OF SPECIFICATIONS
CLINICAL CHEMISTRY 3
FINAL EXAMS - TABLE OF SPECIFICATIONS
TOPIC
|
PERCENT (%)
|
ITEMS
|
|
ENDOCRINOLOGY
|
48
|
55
|
|
TOXICOLOGY
|
31
|
35
|
|
DRUG TESTING
|
21
|
25
|
|
TOTAL
|
100%
|
115
|
Grand
Total= 130 items
|
TRANSCRIPTION
|
15
|
TRANSCRIPTION = 15
POINTS FOR A GRAND TOTAL OF 130.
Please Bring:
Calculator (no borrowing of
calculators)
Blue book ( 1 pc.)
Permits
Pencil lead 2 (2 pcs) for SCANTRON
answer sheet
Type of test
1. MULTIPLE CHOICE
(115 pts), which includes:
Matching type (3 pts.)
Problem
solving (3 pts)
Case analysis (7 pts.)
II.
TRANSCRIPTION (15 pts.)
Wednesday, April 30, 2014
TABLE OF SPECIFICATIONS - CLINICAL CHEMISTRY 3- LECTURE
CLINICAL CHEMISTRY 3-
LECTURE
MIDTERM EXAMS, SUMMER AY: 2013-2014
TABLE OF
SPECIFICATIONS
|
TOPIC
|
(%)
|
MC
|
MT
|
PS
|
CA
|
ID
|
TRANS
|
TOTAL ITEMS
|
|
ENDOCRINOLOGY
|
72
|
25
|
24
|
5
|
20
|
7
|
9
|
90
|
|
TOXICOLOGY
|
28
|
10
|
6
|
10
|
|
3
|
6
|
35
|
|
|
|
|
|
|
|
|
|
|
|
TOTAL
|
100%
|
35
|
30
|
15
|
20
|
10
|
15
|
125
GRAND
TOTAL
|
LEGEND:
ID- IDENTIFICATION
MC – MULTIPLE CHOICE
MT- MATCHING TYPE
PS – PROBLEM SOLVING
CA - CASE ANALYSIS
TRANS - TRANSCRIPTION
WHAT TO BRING:
1.
BLACK OR BLUE BALLPENS (2)
2.
BLUEBOOK #1
3.
CALCULATORS (BORROWING OF CALCULATORS IS NOT
ALLOWED)
4.
PERMITS
PLEASE COME IN COMPLETE UNIFORM.
FYI
/VBG
Sunday, April 20, 2014
Winners of Edublogging CC3 2012-2013
The prizes are not much because we do not have donors. Kaya lollipop na lang. Claim your prizes tomorrow from
me at the ground floor, room of Sir Nino. Congratulations:
First Prize:
Second Prize:
BLESSY CONTRERAS - CCBLOGNOTES 8b-A -
http://clinchem8ba.blogspot.com/2013/04/adrenaline-rushsuperhuman.html 23.26% (77
votes)
Third Prize:
TO VIEW ACTUAL RESULTS, CLICK HERE.
Subscribe to:
Posts (Atom)

